Barrel Heaters Liquid Cooled

National heaters liquid cooled cast-in barrel heaters are the most common cast -in heater design used on plastics extrusion barrels. The liquid cooling tubes run symmetrical to the heater element, which provides a uniform cooling pattern across the body of the casting. This cooling function dissipates heat rapidly from the cast-in barrel allowing a tight control of the melt temperature during operation. The typical liquid cooled design features a single diameter cooling tube of stainless steel or nickel alloy. The tubes can be supplied with no termination and plumbed at the location of the equipment, or other termination options such as cast-in threaded fittings can be supplied to minimize installation time. This cast-in design is also available with a dual cooling function. Although slightly larger in thickness, this design allows for a second cooling tube assembly, which can be employed, if the initial cooling line fails due to scale build up or cracking due to corrosion. All National heaters cast-in barrel heaters are available with mounting options of stainless steel locking straps or bolt-on clamping construction. Various electrical termination options are available depending on the application or environmental requirements.

APPLICATIONS:
Vacuum forming
Pressure assist forming
Drape and press forming
Barrel and sprue bushing heating
Hopper heating
Manifold heating
Hot runner systems